Deersync McONE Active Monitor Controller | MaxStrata®
The McONE Active Monitor Controller is a 10.25″ x 6″ x 3.25″ slanted desktop device that weighs just shy of 4 lbs. It is finished in a white/cream color with black lettering and is capped on each end by thick wood side panels. If your studio furniture is contemporary and you also love to use some vintage gear, the McONE Active belongs in your studio. The active monitor controller looks like a cross between classic and fashion. It is a custom-made piece of art just for you.
Simple Input Switching: 3 stereo 1/4″ balanced inputs (accepts unbalanced as well for CD players, MP3s, etc.)
Simple Output Switching: 3 stereo 1/4″ balanced outputs for three dedicated sets of monitors
Sub Output: Subwoofer dedicated output (with a separate off switch to check mixes without it)
Cue Feed: Artist monitor output to feed headphone monitoring system (separate source select, and carries talkback mic signal to artists)
Talkback Mic: Feeds the Cue output, while dimming the speaker outs by -17dB
Powerful Headphone Amp: Caution: Loud and clean audio ahead, for use in the control room to check mixes on headphones
Dim, Mono, and Mute: Take full control over the stereo mix, and hear every last detail
Product Highlights
- Active balanced on all inputs and outputs
- Also accepts unbalanced signals from iPods, CD players, etc
- Clean, uncolored and detailed audio with uber flat response at all volumes
- Table top, ergonomic design is easy to reach for
- Cream color with black text is easy to read in dim lighting
- Wooden sides bring an old school vintage vibe to your DAW studio
- 3 Inputs, TRS 1/4” Balanced, Selectable for monitoring or CUE feed
- 3 Speaker Outputs, TRS 1/4” Balanced for multiple stereo pairs
- 1 Stereo Subwoofer Output, TRS 1/4” Balanced with on/off switch
- 1 Stereo CUE output, feed your artist headphone system with three inputs + talkback
- 1 Headphone output for control room / engineer
- Talkback microphone with talkback gain trim access on bottom of unit
- Volume pot, high quality ALPS
- Headphone amp volume control
- MONO summing for checking mixes, affects 3 speaker outs and subwoofer
- DIM function, -17dB value (engages during talkback)
- MUTE function
- Power switch with soft amber glow LED indicator
- Universal power supply, auto sensing (standard IEC 3 prong)
Specification
- Input: Maximum Input Level +26dBU
- Output: Maximum Output Level before clipping +29dBU
- Signal to Noise Ration: @ 0dBu unity gain 120dB
- Crosstalk: L/R @ 1kHz -105dBu
- THD and Noise: unity gain +24dBu input .005%
- Frequency Response: 20Hz*20kHz +/* 0.3dB
- Dimensions: 10.25”W x 6”D x 3.25”H
- Weight: 3.55 LBS (1.6 KG)
- Power Requirements: 12-18V @ 1000mA (power supply is universal for worldwide use)
